Android FBI Virus - although it is just malware

May 12, 2016, 4:40 pm

≫ Next: Browser Hijacked - You Are Locked Out From Using It (Win7)

≪ Previous: Reprap Full Graphic Smart Discount Controller

$

0

0

This will be just a short one with no images or links as it is not really required.You might not want to admit to any wrong doing, so I am not saying you did ;)But jokes aside the so called FBI Virus usually lands on a device once you checked a website you should not have checked or clicked on somet...
By: Downunder35m

Continue Reading »

---

Browser Hijacked - You Are Locked Out From Using It (Win7)

July 9, 2016, 5:16 am

≫ Next: Nexus 7 Wifi (2013, Flo, Razor) - Guide to firmware installations and multiple Roms

≪ Previous: Android FBI Virus - although it is just malware

$

0

0

Yesterday I followed a Google search and when I followed one of the provided links I was greeted with a very nasty surprise.A pop up came over the browser tab informing that Windows has found a Koobface infection and that I should call the provided +1-800 number to get the Microsoft report, quoting ...
By: Downunder35m

Continue Reading »

Nexus 7 Wifi (2013, Flo, Razor) - Guide to firmware installations and multiple Roms

May 12, 2016, 4:40 pm

≫ Next: How to use and join EL wire

≪ Previous: Browser Hijacked - You Are Locked Out From Using It (Win7)

$

0

0

I invested a lot of time and tried to make it as simple as possible, so please read the informations provided completely before starting to mess with your device.The infos here can be used on models too, especially from the Nexus series.However you are required to use the corresponding Recoveries an...
By: Downunder35m

Continue Reading »

How to use and join EL wire

May 12, 2016, 4:40 pm

≫ Next: Internet limiting / restrictions - does your ISP tell you the truth?

≪ Previous: Nexus 7 Wifi (2013, Flo, Razor) - Guide to firmware installations and multiple Roms

$

0

0

Most Instructables you find are short and offer the basics to repeat what was shown.As you might already noticed I go a slightly different way with mine, so don't be shy and think it is long and boring ;)I will focus mainly on the wire here as I have no tape or sheets around right now, but I will up...
By: Downunder35m

Continue Reading »

Internet limiting / restrictions - does your ISP tell you the truth?

May 12, 2016, 4:40 pm

≫ Next: 3D print ABS on a cold bed and onto any material

≪ Previous: How to use and join EL wire

$

0

0

What will this Instructable be about?Firstly about some technical stuff in regards to your connection,secondly about how to check your connection in ways your ISP does not want you to know.But most importantly about how to figure out if your ISP is limiting your connection or blocking certain servic...
By: Downunder35m

Continue Reading »

3D print ABS on a cold bed and onto any material

May 12, 2016, 4:40 pm

≫ Next: WiFi security in Home and Office

≪ Previous: Internet limiting / restrictions - does your ISP tell you the truth?

$

0

0

This a two part Instructable.The first part is about BuildTak and the second about using plastic primer to print on any surface you like.BuildTak? Never heard of it....No wonder as the product is quite new and most manufacturers of 3D printers won't include it when you buy one.Some don't even list i...
By: Downunder35m

Continue Reading »

WiFi security in Home and Office

May 12, 2016, 4:40 pm

≫ Next: Removable shopping trolley tokens

≪ Previous: 3D print ABS on a cold bed and onto any material

$

0

0

Update 13/04/2015: Added Author's quick pick'sUpdate 12/04/2015: Added a step for additional security tests.Update 05/04/2015: Added extra step with information and links about backdoors and other security risks in WiFi routers.Update 04/04/2015: Fixed a bad typo regarding the WPA2 encryption - than...
By: Downunder35m

Continue Reading »

Removable shopping trolley tokens

May 12, 2016, 4:40 pm

≫ Next: Data recovery for SD, USB and hard drive

≪ Previous: WiFi security in Home and Office

$

0

0

Don't you hate it coming from work and still needing to go shopping?When you get to the shop and you need a trolley it will demand some currency, fake or real so the lock opens.You start digging your pockets for a coin, all while the rain is pouring down on you.Sure we all know these plastic tokens ...
By: Downunder35m

Continue Reading »

---

Data recovery for SD, USB and hard drive

May 12, 2016, 4:40 pm

≫ Next: Air raid siren from a sewing machine

≪ Previous: Removable shopping trolley tokens

$

0

0

Disclaimer:I am not responsible that you lost your data to begin with, but I won't take responsibilty if this Instructable does not recover your data or loose even more - use the informations at your own risk! Having said that I used the programs quite a lot and always to my satisfaction. However th...
By: Downunder35m

Continue Reading »

Air raid siren from a sewing machine

May 12, 2016, 4:40 pm

≫ Next: Pet drinking bowl with soda bottle reservoir

≪ Previous: Data recovery for SD, USB and hard drive

$

0

0

I looked around for a usable siren that is neither based on a speaker nor just a tiny "whistle".Sadly there was nothing good around.What was there not to like on the many available siren models?1. Most are just tiny and createnothing but an annoying noise.2. Classic designs, scaled to around 10cm di...
By: Downunder35m

Continue Reading »

Pet drinking bowl with soda bottle reservoir

May 12, 2016, 4:40 pm

≫ Next: Embedded printing

≪ Previous: Air raid siren from a sewing machine

$

0

0

I looked around the web to find something simple that I can print out and use for my cats so I don't have to refill twice a day.Sadly there was only one design that looked half decent but the thread used on it was a bit too tight to get a bottle in :(Time to create my own...I used a size that can st...
By: Downunder35m

Continue Reading »

Embedded printing

May 12, 2016, 4:40 pm

≫ Next: Fixing a Sewing Machine Crash

≪ Previous: Pet drinking bowl with soda bottle reservoir

$

0

0

Embedded printing - what is that???Well, I could not think of anything short to name it more defined.For this Ible it means creating a print with electronics integrated into the print.So instead of glue or snap-lock-connections everything is put into the print and then the print continues to create ...
By: Downunder35m

Continue Reading »

Fixing a Sewing Machine Crash

May 12, 2016, 4:40 pm

≫ Next: Goodbye Moshi or how to run your laser printer on Arduino

≪ Previous: Embedded printing

$

0

0

I know, I'm a guy, so what would I know about a sewing machine...You might be surprised ;)But jokes aside, every once in a while for the experienced operator and much sooner for the beginner you can have an accident.By accident I don't mean the usual, a broken needle or some yarn messed up around th...
By: Downunder35m

Continue Reading »

Goodbye Moshi or how to run your laser printer on Arduino

May 12, 2016, 4:40 pm

≫ Next: Lasercut Icosahedron (regular)

≪ Previous: Fixing a Sewing Machine Crash

$

0

0

Update 19/04/2016:MarlinKimbra is here!This is one of the best firmwares based on Marlin I have seen for a long time, no feature is missing.But for our purpose here it is just about being up to date and getting better results.Please check the last step of this Ible as I will keep future updates ther...
By: Downunder35m

Continue Reading »

Lasercut Icosahedron (regular)

May 12, 2016, 4:40 pm

≫ Next: Laser Cut and Engraved Coffin

≪ Previous: Goodbye Moshi or how to run your laser printer on Arduino

$

0

0

After checking some designs I found online for boxes and other things I wanted to see if I can create a simple joining system myself.Already did some hinges for another project and I quite like geometric forms that can be explained by math so I decided on a regular Icosahedron for my project.If you ...
By: Downunder35m

Continue Reading »

---

Laser Cut and Engraved Coffin

May 12, 2016, 4:40 pm

≫ Next: True 8bit photo engraving on chinese laser cutter - maybe a worlds first?

≪ Previous: Lasercut Icosahedron (regular)

$

0

0

I made a coffin for the monster high dolls my little niece loves so much about a year ago.Was quite crude from thin MDF and decorated (to cover the imperfections) with some decals I printed.Now it was time to use my new toy to create much better looking one:As you can see it is not just the standard...
By: Downunder35m

Continue Reading »

True 8bit photo engraving on chinese laser cutter - maybe a worlds first?

May 12, 2016, 4:40 pm

≫ Next: Browser Hijacked - You Are Locked Out From Using It (Win7)

≪ Previous: Laser Cut and Engraved Coffin

$

0

0

Update 11/04/2016: The new firmware is ready :)You can download the HEX file here.To upload it to your Mega2560 please use XLoader.The program pretty much explains itself: Select hex file, set board and com port, hit upload and enjoy.All vital values are stored in the EEPROM for easy tweaking like a...
By: Downunder35m

Continue Reading »

Browser Hijacked - You Are Locked Out From Using It (Win7)

July 9, 2016, 5:16 am

≫ Next: Lead Acid Battery Care and How to Restore Them

≪ Previous: True 8bit photo engraving on chinese laser cutter - maybe a worlds first?

$

0

0

Yesterday I followed a Google search and when I followed one of the provided links I was greeted with a very nasty surprise.A pop up came over the browser tab informing that Windows has found a Koobface infection and that I should call the provided +1-800 number to get the Microsoft report, quoting ...
By: Downunder35m

Continue Reading »

Lead Acid Battery Care and How to Restore Them

November 20, 2016, 5:00 pm

≫ Next: Aircon One on One, the Things You Should Know

≪ Previous: Browser Hijacked - You Are Locked Out From Using It (Win7)

$

0

0

Today I came across a very misleading Instructable promoting a commercial website and giving totally wrong infos - so let's try to make it better!Winter is coming and your car battery is already a bit on weak side? Or you had the battery stored unused for a long time? In those and some other cases ...
By: Downunder35m

Continue Reading »

Aircon One on One, the Things You Should Know

January 17, 2017, 8:40 am

≫ Next: My Little Paracord Splicing Guide

≪ Previous: Lead Acid Battery Care and How to Restore Them

$

0

0

This is yet another of my boring Instructables without any videos or lots of images showing things.So if you expected this and don't like just reading then please move to avoid being disappointed.But if you think there might be something useful coming up please read on - you never know what you miss...
By: Downunder35m

Continue Reading »